Overview :

ADSL USB+(3.0) is a high-speed ADSL2+ USB router that is specifically designed to connect to the Internet and to directly connect to your USB interface. The ADSL2+ modem is compatible with the latest ADSL standards, including ADSL2 and ADSL2+, and supports up to 24 Mbps downstream and 1 Mbps upstream to deliver true broadband speed and throughput.
To ensure fully compatibility, the DSL device was tested with all major DSLAMs, and support standard 480 Mbps USB2.0 interface. The DSL device is an idea solution for user utilizing build-in channel mode (PPPoE/A, IPoA, IPoE), IP routing, NAT functionalities. The DSL device is also a perfect solution for the residential users, it supports the users with bridge mode in host based PPPoE Client.

Features :

QoS enables smooth voip, video streaming and lag-free online gaming
Compliant to the most updated ADSL2/2+ standards
Realtek Chipset solution
1x USB LAN ports and 1x RJ-11 WAN port.
Support PPPoE (RFC-2516) and PPPoA (RFC-2364)
Support Bridge mode and Routing
Support DHCP, NAT, Dynamic DNS, and DMZ host
Firewall support MAC filtering and IP filtering
Support 8 PVCs
Support UPnP
Support ACL (Access Control List)
Easy installation and configuration via WEB interface

Specifications :

ADSL Specification Compliance
ANSI T1.413 Issue2
ITU-T G.992.1 (G.dmt)
ITU-T G.992.2 (G.lite)
ITU-T G.994.1 (G.hs)
ITU-T G.992.3 ADSL2 G.dmt.bit
ITU-T G.992.4 ADSL2 G.lite.bis
ITU-T G.992.5 ADSL2+
Auto-negotiating rate adaptation
Annex A (ADSL over POTS) , Annex L(ReADSL)
Maximum downstream rate of 24 Mbps and upstream rate of 1 Mbps
Supports Dying Gasp
Software Specification
RFC-1483/2684 LLC/VC-Mux bridged/routed mode
RFC-1577 Classical IP over ATM
RFC-2516 PPPoE
RFC-2364 PPPoA
RFC-1661 PPP
Bridge/Routing
DHCP Client/Sever/Relay
IP routing : RIP v1/v2
Static route
DNS Relay Agent
Dynamic DNS
IGMP Proxy
802.1d Spanning-Tree Protocol
NAT (Network Address Translation)
NAPT port forwarding
DMZ support
Security
User authentication for PPP
PAP (Password Authentication Protocol)
CHAP (Challenge Authentication Protocol)
Firewall
IP/Port filtering
MAC filtering
ATM
ITU-T 1.610 F4/F5 OAM send and receiver loop-back
ATM QoS : CBR, rt-VBR, nrt-VBR and UBR
Multiple PVC : support 8 PVCs
Management
Web-based configuration
Telnet remote management
SNMP v1/v2/Trap
Diagnostic tool
Firmware upgrade through FTP, TFTP and HTTP
UPnP support
ACL (Access Control List)
Hardware Interfaces
1x USB port connect to PC
1x RJ-11 port for ADSL connects to WAN
1x reset button to default setting
LED indicators
Environmental Specification
Temperature:
0 to 40 degrees C (Standard Operating)
-40 to 70 degree C (Non-operating)
Humidity:
-10% to 90% (Non-condensing, Standard Operating)
-5% to 95% (Non-condensing, Non-operating)
Vibration: IEC 68-2-36, IEC 68-2-6
Shock: IEC 68-2-29
Drop: IEC 68-2-32

Dimensions :

115 x 70 x 30mm
75g

Accessories :

ADSL cable(RJ11) x1
Quick Guide x1
USB cable x1
Splitter x1
CD Disc x1

Relevant Links :

Manual
Driver
DM